Network Instruments RMON Probe

LoriotPro supports the Software RMON probe from Network Instruments.

The probe is a Windows software that can be install on any station or server.

The RMON Display shows a convenient quick snapshot of current LAN conditions.

Check out our white paper on the advantage of Network Instruments’ Advanced Probes vs. RMON Probes.

Network Instruments’ Probes can be installed as an Advanced Probe or an RMON Probe
All Network Instruments Probes are RMON-ready. Simply choose RMON at the time of installation for complete RMON compliance. Monitor the RMON Probe with your own console or purchase our most comprehensive network management solution – Observer Suite.

Highlights
  • Full compliance with RMON1, RMON2 and HCRMON
  • Complete, industry-standard, software-based Probes for Windows 2000/XP/2003
  • Software based, non-dedicated data collection
  • Compatible with Network Instruments’ optimized ErrorTrak™ NDIS drivers, which display true errors-by-station

Configuration
  • Supports Ethernet (10/100/1000), Token Ring (4/16/100)
  • Runs on a standard, non-dedicated Windows 2000/XP/2003 PC and requires no additional hardware
  • Optimize packet capture, performance and receive additional error information by purchasing additional Ethernet NICs and ErrorTrak™ drivers
    available from Network Instruments.
  • Must be installed on at least one remote system for each remote network, segment or switch to be monitored
  • Run the RMON Probe as a service for full-time data collection

Full compliance with RMON1, RMON2, HCRMON
Network Instruments’ RMON Probes provide full support for all 21 RMON and HCRMON groups by adhering to the following RFC Standards:

Choose the Advanced Single Probe or the Advanced Multi-Probe for more options in remote monitoring.